flute

flute

Table of Contents

The Irish flute is a conical-bore, simple-system wooden flute of the type favoured by classical flautists of the early 19th century, or to a flute of modern manufacture derived from this design (often with modifications to optimize its use in Irish Traditional Music, Scottish Traditional Music or Music of Brittany and other Celtic nations).

The majority of traditional Irish flute players use a wooden, simple-system flute.

Irish Flute Performers

Although it is played in every county in Ireland, the flute has a strong heartland in the mid-western counties of Roscommon, Leitrim, Sligo, south Fermanagh, east Galway, Clare and west Limerick

Matt Molloy playing flute in Westport in March 2000
Matt Molloy playing flute in Westport in March 2000

The simple system, transverse flute which plays a diatonic (Major) scale as the tone holes are successively uncovered. Most flutes from the Classical era, and some of modern manufacture include metal keys and additional tone holes to achieve partial or complete chromatic tonality. Due to its wooden construction, characteristic embouchure and direct (keyless) fingering, the simple system flute has a distinctly different timbre from the Western concert flute. Most Irish flute players tend to strive for a dark and reedy tone in comparison to classical flautists. Though most commonly pitched in the key of D, simple system flutes are available pitched in other keys, and are often heard in Irish music pitched in E flat, B flat and C. Although referred to as a D flute, this is a non-transposing instrument, so if you finger C, a concert-pitch C is sounded. The name D-flute comes from the fact that the simplest 6-hole wooden flute has D as its lowest note and plays the scale of D without any cross-fingering. The E-flat, B-flat and C versions are transposing instruments.

The flute has six main finger-holes. For a D flute (the most common variety), with X symbolizing a covered finger-hole and O symbolizing an uncovered finger-hole, all holes covered, (three fingers per hand) can be represented as XXX-XXX = D . As the scale progresses, XXX-XXO = E, XXX-XOO = F#, XXX-OOO = G, XXO-OOO = A, XOO-OOO = B, OOO-OOO = C#, with XXX-XXX or OXX-XXX being the higher octave D for the full D major scale.

Wooden flutes have a cylindrical bore in the head and a conical bore in the body. This bore is largest at the head end, tapering down to a smaller bore at the foot. This has the effect of shortening the flute for a given pitch.

There is some confusion with modern players in that a modern Boehm keyed system flute is typically pitched in C. This is due to the added keys that allow one to reach low C, yet when one covers just the six main finger-holes (with thumb key covered) on a modern metal Boehm system flute, (XXX-XXX) the note achieved is D. For many technical reasons, a simple system D wooden flute more closely mirrors a concert C modern Boehm system flute in the pitches achieved in its fingering positions as opposed to a simple system flute pitched in C. Theobald Boehm completely redesigned the flute to more easily access the chromatic scale. The Boehm flute has a cylindrical bore (with a parabolic bore in the head) and uses keys to enable the tone holes to be in the ideal place and to be of the ideal size.

Modern variations and flute makers

Today, transverse “simple system Irish” flutes are being made for the playing of a variety of traditional musical styles. In the Irish tradition, the material used is most commonly wood, but also Delrin, PVC, and even bamboo is used – though wood is still by far the most popular material. These modern Irish flutes can vary in the number of added metal keys, or have no keys at all. Most are tuned using modern methods and are typically better in tune with modern instruments. All have the basic six hole diatonic design as in a tinwhistle.

Today’s makers emulate the designs of old, focusing often on a specific model or serial number, and maintaining tuning to today’s modern pitch standard of A=440 at equal temperament. The flutes of Rudall & Rose and Pratten were made in the meantone temperament, though some were created in equal temperament.

Some modern “Irish” wooden flute makers include:

  • Eamonn Cotter - based in County Clare.
  • Martin Doyle - based near Liscannor, in the County Clare.
  • Hammy Hamilton - based in Cúil Aodha, West Cork.
  • Terry McGee - based in Australia.
comments powered by Disqus

Related Posts

Bill Boetticher

Bill Boetticher

His musical credits include the soundtrack for the Academy Award winning Dead Poets Society (Special Edition) the London Philharmonic at Abbey Road CD, and hundreds of public appearances throughout Ventura, Santa Barbara and Los Angeles counties.  Bill also plays the Scottish Small Pipes and the Parlor pipes for more intimate occasions. 

bagpipes at your wedding

bagpipes at your wedding

Bagpipes add a distinctive and ceremonial touch to weddings, particularly in Scottish, Irish, and other Celtic traditions.

chris apps

chris apps

Hiring a professional bagpipe player will enhance your special occasion like nothing else can. Whether your event is celebratory or poignant the emotions brought out by a well played bagpipe will add that special something. Whether you’re looking for bagpiper for your wedding, funeral, memorial service, business opening or back yard b.b.q.